How to Care for Your Outdoor Timber Table Through the Seasons

Solid timber furniture is built to live outdoors, but like anything made from a natural material, a little seasonal care goes a long way. Here's how to look after yours, based on your finish.

Raw timber

Left untreated, raw timber will silver and weather naturally, a look plenty of our customers love. If you'd rather keep the original tone, apply an outdoor timber oil or sealer every 6–12 months.

Painted and fully varnished

Wipe down with a soft cloth and mild soapy water as needed. These finishes are best suited to covered or semi-covered areas, and a light top-up coat every year or two will keep them looking fresh.

Stained and oiled

Our Walnut Stain, Merbau Stain and oiled hardwood finishes soak into the timber rather than sitting on top, so they weather more gracefully. A fresh coat once a year keeps the colour rich and protects the grain.

Every finish, year-round

Whatever your finish, sweep off leaves and standing water where you can, check hardware after the first few months of settling in, and avoid dragging the table across hard surfaces. In harsh coastal or high-UV areas, a cover over the cooler months will extend any finish's life.

For the full breakdown by finish, visit our Furniture Care page.

Back to blog

The Serano difference

Small details that make a table last

Concealed screws, sanded edges, galvanised hardware and timber chosen for the job. See how our tables compare with a typical picnic table.

See what makes a Serano table different