Keeping your table at its best
A few minutes of care a season keeps your timber looking and performing the way it should.
Furniture Care
Care & Maintenance
Every Serano Living table is handcrafted from quality Australian timbers such as Spotted Gum, Redgum, Ironbark, Merbau, and treated or untreated pine, each chosen for its strength and its ability to perform outdoors.
We build every piece to last, but like all natural timber, outdoor furniture needs a little care to stay at its best.
Wood responds to the weather it lives in. Heat, rain, and sunlight bring gradual changes in colour, grain, and texture, that's not a flaw, it's part of what makes timber genuine and full of character. With basic, regular maintenance, your furniture will stay strong and age gracefully for years to come.
General Care Guide
- Wipe your table down regularly with a damp cloth. Avoid abrasive sponges or harsh chemical cleaners, as these can damage the timber's natural finish over time.
- Use placemats and coasters as standard practice, they help protect the surface from scratches, stains, and water marks.
- Avoid placing hot glasses, plates, or cookware directly on the surface, the heat can damage the protective coating and leave a permanent burn mark.
- Position your furniture on a flat, level surface to prevent uneven wear and unnecessary stress on the joints.
-
What to Do
- Clean regularly: Wipe your furniture down with a soft cloth and mild soapy water to remove dirt, dust, and spills before they set in.
- Apply a protective coating: Use a suitable finish such as paint, stain, or varnish to shield the timber from sun and moisture.
- Inspect frequently: Check for early signs of wear, like small cracks or splits, and address them before they spread.
- Use a cover when not in use: A breathable cover protects your furniture from strong sunlight and harsh weather between uses.
- Recoat as needed: Reapply your protective finish every 6–12 months to maintain both appearance and weather resistance. The right timing depends on your sun exposure and local climate.
-
What to Avoid
- Leaving timber unprotected: Exposed, unfinished/untreated wood deteriorates quickly outdoors.
- Harsh chemicals: Abrasive cleaners and strong solutions can strip finishes and damage the timber underneath.
- Poor drainage: Avoid placing furniture on wet or uneven ground, where pooling water can lead to warping.
- Skipping maintenance: Neglected upkeep can lead to serious damage, including deep cracks or rot.
- Ignoring the climate: Extreme dryness or high humidity can cause timber to expand or shrink, so keep an eye on your local conditions.
Stained Furniture
What Is Timber Stain?
Stain is a protective, colour-enhancing finish applied to the surface of timber. Unlike paint, which sits on top of the wood and hides the grain, stain penetrates into the timber itself, enriching its natural colour and grain pattern while still letting the timber's character show through. Most modern outdoor stains are water-based and formulated specifically to handle the demands of exterior use, from direct sun to rain and humidity.
What Stain Does to Your Timber
A quality stain does more than change the colour of your table. It's your timber's first line of defence against the outdoors. Applied correctly, stain helps to:
- Protect against UV damage: Reducing the fading and greying that untreated timber develops from prolonged sun exposure
- Resist moisture: Helping repel rain and humidity, which reduces the risk of warping, swelling, or cracking over time
- Enhance natural beauty: Deepening the timber's grain and colour rather than masking it, so the wood still looks and feels like solid, honest timber
- Extend the life of your furniture: A well-maintained stain finish significantly slows the natural weathering process, keeping your table structurally sound for years longer than bare, untreated timber
Maintenance & Application Tips
- Inspect annually: Check your table each year for signs of fading, dullness, or areas where the finish has thinned. This is your cue that a recoat is due, well before the timber underneath is left exposed.
- Clean before recoating: Remove dirt, grime, and any flaking finish with a light clean (and light sanding if the surface has roughened) before applying a fresh coat. Stain adheres best to a clean, prepared surface.
- Recoat before it fails, not after: As a general guide, most outdoor stains perform best when reapplied every 12 months, though this depends on your climate and how exposed your table is to direct sun and rain. Recoating early is always better than letting bare timber be exposed.
- Apply in the right conditions: Stain generally cures best in mild, dry weather (avoid extremes of heat, cold, or rain within the first few hours of application). Check your product's specific temperature and drying guidance before you start.
- Allow proper curing time: Freshly stained furniture needs time to cure fully before heavy use. Avoid placing hot items, heavy loads, or exposing the table to rain until the finish has properly set.
Note: Stain penetrates the timber rather than coating it, so its protection wears with exposure over time. Regularly reapply same tone as needed to keep colour and weather protection consistent.
Get a quote for stained picnic tables: Contact Serano Living with your desired timber, dimensions, quantity and location.
Varnished Furniture
What Is Varnish?
Varnish is a clear (or lightly tinted) protective coating that sits on top of timber, rather than soaking into it like an oil or water-based stain. It's made from resins suspended in a solvent or water base, and once applied, it cures into a smooth, sealed finish that highlights the natural timber grain and makes cleaning easy.
What Varnish Does to Timber
Rather than penetrating the wood, varnish forms a strong surface barrier against moisture and stains, giving the timber a glossy or semi-gloss finish depending on the product chosen. This makes it ideal for undercover or semi-protected outdoor areas, where it performs extremely well and requires the least maintenance of any finish.
Please note: Varnish is not recommended for fully exposed outdoor settings. Being a clear coating, it offers little UV resistance and may crack or peel over time under direct sunlight and harsh weather. Keep varnished picnic tables in shaded or covered spaces for the best results.
Maintenance & Application Tips
Before applying:
- Surface should be clean, dry, and free of wax, oil, grease, or other contaminants.
- Lightly sand with fine sandpaper (around 240-grit) and round off sharp edges, then dust thoroughly with a tack cloth before coating.
- On oily or tannin-rich timbers (like merbau or jarrah), test a small patch first, since some varnishes don't bond well without extra prep.
Applying:
- Apply thin, even coats rather than one heavy one. This helps the varnish cure properly and reduces the risk of bubbling or sagging.
- Lightly sand between coats to help each layer key into the last.
- Most exterior varnishes need 2–3 coats for full protection.
Ongoing care:
- Because varnish is a surface film rather than a penetrating finish, it can crack, flake, or wear through in high-traffic or sun-exposed spots (tabletops especially) faster than the timber underneath.
- A light sand and recoat is generally recommended annually for general use, or sooner if the tabletop is in a harsh, fully-exposed outdoor spot.
- Once the coating starts wearing unevenly, it's best to address it early, recoating over a mostly-intact surface is far simpler than stripping back a fully failed one.
Painted Furniture
What Is Paint?
Paint is an opaque, pigmented coating that sits on the surface of timber, fully covering the natural wood grain rather than letting it show through. It's typically made from pigments and binders suspended in a water or solvent base, curing into a solid, continuous film once applied.
What Paint Does to Timber
Unlike varnish or stain, paint forms a complete opaque barrier, providing a strong, colourful seal that covers the timber entirely. This makes painted picnic tables the easiest of all finish options to maintain and the most weather-resistant, since the full coverage blocks moisture, UV, and general wear more effectively than a clear or semi-transparent finish.
While paint is more forgiving to apply than varnish or oil, it also needs more frequent upkeep to keep colours looking fresh, especially with light tones, which tend to show dirt and grime more easily than darker shades.
Maintenance & Application Tips
- Cleaning: Keep your painted picnic table looking its best by washing it gently with mild soapy water and a soft sponge. Avoid abrasive scrubbing pads or harsh cleaners, as these can dull the finish or chip the paint surface over time.
- Repainting: For long-lasting protection, repaint your outdoor picnic table every 1–3 years, or sooner if you notice fading, cracking, or peeling paint. Lightly sanding the surface before applying a fresh coat improves paint adhesion and extends the life of the finish.
- Touch-Ups: Minor scratches or chips don't require a full repaint. Simply touch up the affected area with a small brush and matching paint colour, no sanding needed for small, isolated marks.
- How to Apply Paint: Paint can be applied using either a brush or a roller. For the smoothest, most durable finish, apply in thin, even layers and always follow the direction of the timber grain.
- Required Coats of Paint: When painting raw or bare timber, apply at least two to three coats to fully seal the surface and protect against the elements. Missed spots or unpainted areas can let moisture penetrate the wood, leading to timber rot over time.
- Choosing a Paint Colour: Light-coloured paints tend to show dirt more easily and may require more frequent cleaning and re-coating. Darker tones generally hold up better over time and show less visible wear.
- Extra UV & Weather Protection: If your picnic table is positioned in a fully exposed outdoor area, applying a clear, UV-resistant and weather-resistant topcoat is recommended for added durability and longer-lasting colour.
Varnished or Stained? Explore Our Collection and Discover the Finish You'll Love
Oiled Furniture
What Is Oil?
Timber oil is a penetrating finish, typically made from natural or synthetic oils, that soaks into the wood fibres rather than sitting on the surface highlighting and enriching the wood's natural colour and grain while leaving the surface feeling like real timber, not a coated one.
What Oil Does to Timber
Rather than sealing the surface, oil penetrates deep into the wood fibres, nourishing the timber from within and providing long-term moisture resistance. It's one of the most natural and effective ways to protect outdoor timber, and it's simple to apply and easy to maintain, though it does require more frequent upkeep than paint or varnish.
Why we recommend oil: Oiled finishes are ideal for hardwood picnic tables. They preserve the natural look and feel of the wood while offering continuous protection against moisture and UV exposure. With tinted oils, you can also achieve a range of subtle natural tones without hiding the grain.
Maintenance & Application Tips
- How Often to Re-Oil: For best results, re-oil your timber picnic table every 6 months. Tables in fully exposed outdoor settings may need more frequent applications to maintain optimal protection.
- Surface Preparation: Light sanding is optional but recommended before oiling. It helps remove surface dirt, rounds off sharp edges, and allows the timber to absorb oil more effectively. Dust the surface thoroughly before you begin.
- Cleaning Before Application: Make sure the surface is clean and completely dry, free from wax, grease, or other contaminants, before applying oil.
- How to Apply Timber Oil: Use a clean brush, lint-free cloth, or roller, and apply the oil along the direction of the timber grain for the most even, natural finish.
- How Many Coats to Apply: One or two coats are typically enough, depending on the timber's dryness and exposure level. If a second coat is needed, allow the first coat to dry for 24 hours before reapplying, wiping away any excess after around 30 minutes.
- Oil Penetration Tips: Timber oil should soak fully into the wood, avoid letting excess oil pool on the surface. Wipe off any residue after 20–30 minutes to prevent a sticky finish.
- Choosing Clear or Tinted Oil: Timber oils are available in clear or tinted formulas, letting you add a custom natural tone to your picnic table while still showcasing the timber's raw texture and grain.
- Why Regular Oiling Matters: Beyond protection, regular oiling revives the natural colour and grain of the timber over time, helping your picnic table age gracefully and retain its character for years to come.
QUESTIONS
Care questions
Can I leave my table uncovered all year?
Yes, all Serano Living tables are built to withstand outdoor conditions year-round. That said, a little seasonal care goes a long way in extending the life and appearance of your furniture.
Winter care: Store your table indoors where possible, or use a secure, weatherproof cover to protect it from rain, moisture, and cold temperatures.
Summer care: Position your table under shade, such as an umbrella or pergola, to reduce direct UV exposure. This is especially important for varnished, oiled, and stained finishes, which are more prone to sun damage over time.
What should I clean it with?
A soft cloth or brush with warm water and mild soap is enough for most marks. Avoid high-pressure hoses and harsh chemical cleaners, which can strip finishes and force water into joints.
The bolts feel a little loose, is that normal?
Yes. Solid timber settles and moves slightly in its first few months outdoors, so hardware can loosen. A quick check and re-tighten with a spanner after the first season is all it needs.
Do you sell touch-up oil or stain?
Not yet as a standalone product. For now, any quality outdoor timber oil or stain matched to your finish will do the job. Get in touch if you're not sure which product to use.
Our Warranty Terms
All Serano Living picnic tables are backed by a 12-month structural warranty, covering any defect in workmanship or joinery that affects the stability or strength of the product.
What this warranty does not cover:
- Natural timber behaviour, including movement, cracking, bowing, or colour variation
- Damage caused by neglect, lack of maintenance, or incorrect installation
- Surface wear, peeling, or fading of coatings due to weather exposure
- Water or moisture damage resulting from unsealed or improperly finished timber
Outdoor timber furniture requires regular maintenance in line with our care recommendations to remain in good condition. Failure to maintain your product as outlined may void this warranty.
Before carrying out any maintenance or refinishing, please make sure the products and finishes you use are suitable for outdoor timber and compatible with the materials used in Serano Living furniture. Applying unsuitable products, or using them incorrectly, can cause surface damage or lead to premature failure of the finish.
If you're unsure which product is right for your table, we strongly recommend consulting a timber care specialist or reaching out to our support team for guidance.
Have a question about your table?
Get in touch and we'll help you keep it looking its best.